Wifi Router for Home Assistant

Router for Home Assistant

one router

This suggests WiFi signal strength may cause issues as the new router has much better coverage.

 

光猫+单个路由器

以ac86u为例子

 

source:https://resource.tp-link.com.cn/pc/docCenter/showDoc?id=1655112548136638

 

将无线路由器的天线调整到与地面垂直，即与地面保持90°，如下图：

 

https://resource.tp-link.com.cn/pc/docCenter/showDoc?id=1655112527392160

 

光猫+多个路由器

如果房间信号不好，我们会添加多个路由器

传统：电视机处需要布置2根网线（1根电视IPTV专用）；

智能：

 

光猫+交换机+路由器

如果光猫的lan口不够用，我们再加一个交换机，用来增加光猫Lan口的数量

光猫

接交换机

 

光猫+交换机+路由器 组有线mesh

如果光猫的lan口不够用，我们再加一个交换机，用来增加光猫Lan口的数量

 

WiFi signal优化信道问题

 

 

Wi-Fi Router settings:

Fixed channel from 1 to 11

Channel width: 20MHz (don't use 40MHz)

Authentication: WPA2 (don't use WPA3)

 

Whole Home WiFi-router

https://www.msly.cn/boards/topic/3194/whole-home-wifi-router

 

Zigbee中的Zigbee PANID,Zigbee CHANNEL,DEVICEID

https://www.msly.cn/boards/topic/15760

 

between zigbee and wifi frequency 2.4ghz

https://blog.matterxiaomi.com/blog/router-homeassistant-part2/

 

Router 带机量

一般家庭路由器，超过10个wifi链接设备，就会经常掉线。我后来换了网件R6400，现在带30多个设备，非常稳定

 

 

move  to new router

 

Yeelight unavailable

I have two Yeelights and they would periodically go unavailable, always sorted by power cycling. I changed my router a couple of months ago and have not had a single issue since.

 

I used the same SSID and password for the new router so did not need to make any changes to the Yeelights.

 

拉根网线没问题的。你这个是光猫拨号，两个路由器就不要开路由功能了，全部设置为桥接组mesh当ap用，这样家里所有设备在一个网段，两台电脑也可以互相访问

 

 

 

useful links

华硕AX系列路由器设置优化与使用指南（以AX86U为例）https://www.zhihu.com/tardis/zm/art/394714329