local-voice_control-ESP32-S3-Box-3_voice_home_assistant-part2

This tutorial is using the bigger ESP32-S3-Box-3B device which features a display. It can detect wake words using openWakeWord. But it can also do on-device wake word detection using microWakeWord.

WakeWord

Table of Contents

 

October 12, 2023,openWakeWord

October 12, 2023,Home Assistant’s wake words are leveraging a new project called openWakeWord by David Scripka.

openWakeWord was too large to run on low power devices like S3-BOX-3. So we chose to run wake word detection inside Home Assistant instead.

 

 

 

Voice: Chapter 6

https://community.home-assistant.io/t/on-device-wake-word-on-esp32-s3-is-here-voice-chapter-6/693607

the new microWakeWord  system running on an ESP32-S3-BOX-3  alongside one doing wake word detection inside Home Assistant

 

 

Feb 22,2024 ,microWakeWord

microWakeWord

Thanks to the incredible microWakeWord  created by Kevin Ahrendt , ESPHome can now perform wake word detection on devices like the ESP32-S3-BOX-3 . You can install it on your S3-BOX-3 .

detail:https://community.home-assistant.io/t/on-device-wake-word-on-esp32-s3-is-here-voice-chapter-6/693607?u=msly

 

process the wake word on the Home Assistant

 

Make sure your assistant has wake word enabled, using “OK Nabu”.

 

step 1.Installing the openWakeWord add-on.

step 2.Enabling the wake word for a specific voice assistant.

 

 

process the wake word on the ESP32-S3 device

You must install microWakeWord on your S3-BOX-3

 

https://www.home-assistant.io/voice_control/about_wake_word/

ggg

Comments


Comments are closed